Parts

ID: 321
Name: Schrittmotor NEMA 17 0,23Nm
Description: Einfacher Schrittmotor mit 4 adriger Anschlussleitung. Technische Daten: Schrittwinkel: 1,8° - 200 Schritte / Umdrehung 2 Phasen Spannung: 12V Strom: 0.33A 42x42mm NEMA 17
Created: 2013-08-12 13:58:56
Updated: 2013-10-20 10:24:55
Category: 81

ID: 322
Name: Schrittmotor: Bipolar, 200 Steps/Rev, 35x26mm, 7.4V, 280mA
Description: This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 280 mA at 7.4 V, allowing for a holding torque of 650 g-cm (9 oz-in). The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. It can be controlled by a pair of suitable H-bridges (one for each coil), but we recommend using a bipolar stepper motor driver.
Created: 2013-08-21 08:50:16
Updated: 2013-10-20 08:03:43
Category: 81

ID: 323
Name: Pololu Universal Aluminum Mounting Hub 5mm
Description: These universal mounting hubs are designed to work with most 5 mm shafts, including round shafts such as those on our stepper motors and “D” shafts. Each hub has four mounting holes for 4-40 screws (not included), letting you mount custom wheels or mechanisms to your motors. 4-40 hex set screws (one included for each hub) allow secure coupling of shaft to hub. A 0.05" hex wrench (often the smallest size in SAE Allen wrench sets) is included for use with the set screws.
Created: 2013-08-21 08:55:38
Updated: 2013-10-20 01:50:44
Category: 182

ID: 324
Name: DIN 912 A2 M3X6
Description: DIN 912 - Zylinderschrauben mit Innensechskant Gewindeschrauben
Created: 2013-10-08 06:03:39
Updated: 2013-10-20 01:54:12
Category: 187

ID: 325
Name: FabScan Shield V1.1
Description: Das FabScan-Shield ist ein Arduino Aufsteckmodul zum 3D-Laser-Scannen. Das Shield ist fertigt bestückt mit den SMD-Komponenten und die Steckverbinder liegen dem Bausatz bei. Weitere Informationen: hci.rwth-aachen.de/fabscan Schaltplan: github.com/watterott/FabScan-Shield Das Shield ist aber nicht nur als FabScaner nutzbar, sondern es ist auch ein universeller Motortreiber. Auf dem Shield ist Platz für bis zu vier Pololu A4988 Schrittmotortreiber oder es lassen sich bis zu 4 Servos anstecken. Auch eine Kombination von Servo und Schrittmotortreiber ist möglich, es ist nur die Gesamtanzahl auf vier beschränkt. Die Pololu A4988 Treiber gehören nicht zum Lieferumfang.
Created: 2013-10-08 06:18:27
Updated: 2013-10-20 01:57:40
Category: 166

ID: 326
Name: Getriebe-Schrittmotor Nema 17 1,68A mit PG5
Description: 17HS19-1684S-PG5 Getriebe-Schrittmotor Nema 17 mit Planetengetriebe (Übersetzung 5,18:1) 1,68A - 40Ncm Haltemoment
Created: 2013-10-08 06:25:14
Updated: 2013-10-20 05:22:02
Category: 81

ID: 327
Name: Waterproof Metal Pushbutton with Blue LED Ring - 16mm
Description: These chrome-plated metal buttons are rugged and waterproof and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep any water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a blue plastic LED ring. On the back there are 3 contacts for the button (common, normally-open and normally-closed) and 2 for the blue LED ring (+ and -). Connect 3 to 6V to the LED to have it light up nicely, there's a built in resistor! If you want to use this with a higher voltage, say 12V or 24V, simply add a 470 ohm resistor in series with the LED connection to keep the LED current at around 20mA. This button is a momentary push button, when you press it the 'normally-open' contact shorts to the common contact. When you release it, the contacts open up again. The switch and LED are separated, so you could wire it to turn on when pressed or vice versa or whatever you wish! Check the tech details for information! Technical Details: Drill hole diameter: 16mm Switch rating: 3A / 250VDC Switch contacts: 1 NO, 1 NC Material: Chrome plated brass Grade: IP40/IP67 Contact resistance: < 50 mOhm Insulation resistance: > 1000 Mohm Temperature: -20 C to +55 C Mechanical life: > 500,000 Electrical life: > 50,000 Panel thickness: 1-13mm Operating pressure: 1.5 - 2.5 N Operating stroke: 2mm Lamp rated voltage: 6V
Created: 2013-10-08 07:37:30
Updated: 2013-10-20 05:21:57
Category: 148

ID: 328
Name: Waterproof Metal Pushbutton with White LED Ring - 16mm
Description: These chrome-plated metal buttons are rugged and waterproof and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep any water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a blue plastic LED ring. On the back there are 3 contacts for the button (common, normally-open and normally-closed) and 2 for the blue LED ring (+ and -). Connect 3 to 6V to the LED to have it light up nicely, there's a built in resistor! If you want to use this with a higher voltage, say 12V or 24V, simply add a 470 ohm resistor in series with the LED connection to keep the LED current at around 20mA. This button is a momentary push button, when you press it the 'normally-open' contact shorts to the common contact. When you release it, the contacts open up again. The switch and LED are separated, so you could wire it to turn on when pressed or vice versa or whatever you wish! Check the tech details for information! Technical Details: Drill hole diameter: 16mm Switch rating: 3A / 250VDC Switch contacts: 1 NO, 1 NC Material: Chrome plated brass Grade: IP40/IP67 Contact resistance: < 50 mOhm Insulation resistance: > 1000 Mohm Temperature: -20 C to +55 C Mechanical life: > 500,000 Electrical life: > 50,000 Panel thickness: 1-13mm Operating pressure: 1.5 - 2.5 N Operating stroke: 2mm Lamp rated voltage: 6V
Created: 2013-10-08 07:41:19
Updated: 2013-10-20 12:26:24
Category: 148

ID: 329
Name: Drucktaster Klein Rot Panel Mount
Description: It's your basic action button! This is a very useful, small, panel-mount momentary switch. It is a SPST N.O. with 1/4" threading. We don't yet have a datasheet for this part, but it would work best in lower-current applications. Overall length (including leads) is 1.08" and has small solder lugs for connection.
Created: 2013-10-08 07:50:11
Updated: 2013-10-20 05:21:47
Category: 148

ID: 330
Name: Druckschalter - Medium Red Panel Mount
Description: This is a very useful panel-mount locking button/switch. Press it once for 'on', once again for 'off'. It is a SPST N.O. with 7/16" threading. This button has a nice 'click' when you press it. We don't yet have a datasheet for this part, but it would work best in medium-current applications. Overall length (including leads) is 1.52" and has small solder lugs for connection.
Created: 2013-10-08 07:53:21
Updated: 2013-10-20 12:50:02
Category: 148