Parts

ID: 331
Name: Drehimpulsgeber - Beleuchtet (RGB)
Description: Rotary encoders can be used similarly to potentiometers. The difference being that that an encoder has full rotation without limits (It just goes round and round). They output gray code so that you can tell how much and in which direction the encoder has been turned. They're great for navigating menu screens and things like that. This encoder is especially cool because it has a common anode RGB LED built in, as well as a push-button. Look below for the clear knob that goes with this potentiometer. Features: Switch Travel: 0.5mm Shaft Diameter: 6.0mm Shaft Length: 18mm Vertical Through-Hole Mount 24 Pulses per Rotation Red/Green/Blue LED Pushbutton Tutorial: http://www.circuitsathome.com/mcu/programming/reading-rotary-encoder-on-arduino Video: http://www.youtube.com/watch?v=HELBcKLL0Zs&feature=youtu.be&t=10s
Created: 2013-10-08 07:56:04
Updated: 2013-10-20 05:21:37
Category: 185

ID: 332
Name: Plastik-Drehknopf transparent
Description: This plastic knob accepts a 6mm shaft and has a 15mm outer diameter. They simple press-fit onto a shaft. These are clear so that they can be used with our illuminated rotary encoders.
Created: 2013-10-08 08:02:21
Updated: 2013-10-20 05:21:32
Category: 186

ID: 333
Name: DIN 912 A2 M3X8
Description: DIN 912 - Zylinderschrauben mit Innensechskant Gewindeschrauben
Created: 2013-10-08 08:13:00
Updated: 2013-10-20 05:21:27
Category: 187

ID: 334
Name: DIN 912 A2 M3X12
Description: DIN 912 - Zylinderschrauben mit Innensechskant Gewindeschrauben
Created: 2013-10-12 23:01:27
Updated: 2013-10-20 05:21:22
Category: 187

ID: 335
Name: HNP12-090 9V 1.33A Steckernetzteil 12W
Description: Top Qualität zum super Preis! Merkmale: 12 Watt Steckerschaltnetzteil mit Universaleingang 90-264 VAC. Hocheffizient & geringer StandBy-Verbrauch EuP Step2 Überlast- und kurzschlussfest DC-Ausgang : Hohlstecker 2,1 x 5,5 x 10 TÜV/GS , CE Eingangsdaten: Eingangsspannung: 90...264VAC Eingangsfrequenz: 47...63Hz Eingangsstrom: 450mA(rms) @90VAC Netzausfallüberbrückung: 20 ms @115VAC Einschaltstromstop: <30A/230VAC Leerlaufverlust: max. 0.3 Watt Ausgangsdaten: Leistung: 12W Ausgang: 9V Max. Last: 1.33A Wirkungsgrad: >75% Ausregelzeit: max. 1ms Restwelligkeit: typ. 200mV pp Allgemeine Daten: Betriebstemperatur: -5°C...+45°C Lagertemperatur: -20°C...+70°C Luftfeuchte: 5...95%RH Isolation: 3000VAC 1min inp.<->outp. Leckstrom: 0.25mA max.@240VAC Überstromschutz: continuous, auto restart Überspannungsschutz: typ. 120% Zulassungsbestimmungen: TÜV RN60950-1:2006+A14 (2009) EMV: EN 55022:2006 EN 55024:1988+A1:2001+A2:2003 EN 61000-3-2:2006; EN 61000-3-3:1995+A1:2001+A2:2005
Created: 2013-10-13 10:01:32
Updated: 2013-10-20 05:21:17
Category: 10

ID: 336
Name: Kohleschichtwiderstand 1/4W, 5%, 18Ohm
Description: Kohleschicht-Widerstände 1/4W 5% 0207 Widerstandstoleranz: ±5% Leistung (70°C): 0,25W Betriebsspannung: 250V Grenzspannung, kurzzeitig: 500V Isolationswiderstand: 1010W Temperaturbereich: -55...+155°C
Created: 2013-10-27 20:28:45
Updated: 2013-10-27 20:43:29
Category: 91

ID: 337
Name: Kohleschichtwiderstand 1/4W, 5%, 27 Ohm
Description: Kohleschicht-Widerstände 1/4W 5% 0207 Widerstandstoleranz: ±5% Leistung (70°C): 0,25W Betriebsspannung: 250V Grenzspannung, kurzzeitig: 500V Isolationswiderstand: 1010W Temperaturbereich: -55...+155°C
Created: 2013-10-27 20:34:01
Updated: 2013-10-27 20:34:59
Category: 91

ID: 338
Name: Kohleschichtwiderstand 1/4W, 5%, 39Ohm
Description: Kohleschicht-Widerstände 1/4W 5% 0207 Widerstandstoleranz: ±5% Leistung (70°C): 0,25W Betriebsspannung: 250V Grenzspannung, kurzzeitig: 500V Isolationswiderstand: 1010W Temperaturbereich: -55...+155°C
Created: 2013-10-27 20:36:27
Updated: 2013-10-27 20:37:04
Category: 91

ID: 339
Name: Wechselstrom Messwandler (100A max)
Description: Wechsel Strom Messwandler bis max 100A. Model: SCT-013-000 http://openenergymonitor.org/emon/buildingblocks/report-yhdc-sct-013-000-current-transformer http://www.youtube.com/watch?v=IHozA4Ds5Ts&feature=youtu.be
Created: 2013-10-27 20:40:08
Updated: 2013-10-27 20:46:38
Category: 157

ID: 340
Name: Bluetooth Mate Gold
Description: The Bluetooth Mate Gold is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our Arduino Pros and LilyPad Arduinos. These modems work as a serial (RX/TX) pipe, and are a great wireless replacement for serial cables. Any serial stream from 2400 to 115200bps can be passed seamlessly from your computer to your target. We've tested these units successfully over open air at 350ft (106m)! Bluetooth Mate has the same pin out as the FTDI Basic, and is meant to plug directly into an Arduino Pro, Pro Mini, or LilyPad Mainboard. Because we've arranged the pins to do this, you cannot directly plug the Bluetooth Mate to an FTDI Basic board (you'll have to swap TX and RX). This unit ships with an RN-41 class 1 bluetooth module, a very easy-to-use and well documented bluetooth module. Make sure you check out the datasheet and command set links below. If you don't need the extra range, check out the Bluetooth Mate Silver which uses a Class 2 module which has less range. The Bluetooth Mate has on-board voltage regulators, so it can be powered from any 3.3 to 6VDC power supply. We've got level shifting all set up so the RX and TX pins on the remote unit are 3-6VDC tolerant. Do not attach this device directly to a serial port. You will need an RS232 to TTL converter circuit if you need to attach this to a computer. Unit comes without a connector; if you want to connect it to an Arduino Pro, we'd suggest the 6-pin right-angle female header. Note: The hardware reset pin of the RN-41 module is broken out on the bottom side of the board. This pin is mislabeled as 'PIO6', it is actually PIO4. Should you need to reset the Mate, pull this pin high upon power-up, and then toggle it 3 times. Features: Designed to work directly with Arduino Pro's and LilyPad main boards FCC Approved Class 1 Bluetooth® Radio Modem Very robust link both in integrity and transmission distance (100m) - no more buffer overruns! Low power consumption : 25mA avg Hardy frequency hopping scheme - operates in harsh RF environments like WiFi, 802.11g, and Zigbee Encrypted connection Frequency: 2.4~2.524 GHz Operating Voltage: 3.3V-6V Serial communications: 2400-115200bps Operating Temperature: -40 ~ +70C Built-in antenna Dimensions: Board: 1.75x0.65" https://www.sparkfun.com/tutorials/67
Created: 2013-10-28 16:10:49
Updated: 2013-10-28 16:12:20
Category: 188