Displaying 581-590 of 771 results.
ID:
581
Name:
Analog Feedback Servo
Description:
It looks like a servo, it acts like a servo, but it's more than just a servo! We got a factory to custom-make these classic 'standard' sized hobby servos with a twist - the feedback (potentiometer wiper) line is brought out to a fourth white wire. You can read this wire with an analog input such as those on an Arduino, to get the servo's position. That information can be used in robotics to improve stability or even allow 'recording' of servo motion.
Check out our example Arduino sketch which demonstrates how to record motion data to the EEPROM and then play it back when a button is pressed. Comes with a range of horns as seen above.
Technical Details:
Dimensions: 39.55mm / 1.5" x 39.55mm / 1.5" x 19.5mm / 0.7"
Max Dimensions: 55.36mm / 2.1" x 43.34mm / 1.7" x 19.5mm / 0.7"
Wire length: 13cm / 5.1"
Torque: 90.26 oz*in / 6.5 kg*cm
Speed: 0.21 sec/60°
Weight: 46 grams
Dual ball bearing
Plastic gearbox
Created:
2015-05-10 23:07:29
Updated:
2015-05-10 23:07:36
Category:
82
ID:
582
Name:
Servo - Large Full Rotation ROB-09347
Description:
Here, for all your mechatronic needs, is a simple, high quality continuous full-rotation servo motor. A standard 3-pin power and control cable is attached and all hardware shown is included.
Features:
Continuous 360° rotation
Rest point adjustment
Operating voltage: 4.8-6.0VDC
Top operating speed: 60-70RPM (4.8-6.0VDC respectively)
Torque: 3.3-4.8 kg-cm (4.8-6.0VDC respectively)
4 plastic gears + 1 metal gear
Double ball bearing
Created:
2015-05-10 23:09:43
Updated:
2015-05-10 23:09:49
Category:
82
ID:
583
Name:
USB DIY Connector Shell - Type Micro-B Plug
Description:
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.
Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.
Technical Details:
Max Dimensions: 29.1mm / 1.14" x 12.33mm / 0.48" x 8.04mm / 0.31"
Weight: 1.96g
Created:
2015-05-10 23:12:34
Updated:
2015-05-10 23:12:46
Category:
249
ID:
584
Name:
USB DIY Connector Shell - Type A Socket
Description:
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.
Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.
Created:
2015-05-10 23:14:49
Updated:
2015-05-10 23:15:18
Category:
249
ID:
585
Name:
USB DIY Connector Shell - Type Mini-B Plug
Description:
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.
Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.
Fügen Sie Ihre Tags hinzu:
Created:
2015-05-10 23:16:33
Updated:
2015-05-10 23:16:45
Category:
249
ID:
586
Name:
USB DIY Connector Shell - Type A Male Plug
Description:
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.
Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.
Technical Details:
Max Dimensions: 45.95mm / 1.8" x 15.82mm / 0.62" x 8.85mm / 0.34"
Weight: 5.36g
Created:
2015-05-10 23:18:20
Updated:
2015-05-10 23:18:34
Category:
249
ID:
587
Name:
0,15m Cat.6 PiMF-Patchkabel, schwarz, RJ45
Description:
Patchkabel Cat.6
- Länge: 0,15 Meter
- Farbe: schwarz
- PiMF = paarig in Metallfolie
- Category 6
- RJ45- Stecker Cat.6
- Längenaufdruck in der umspritzten Tülle
- Belegung nach EIA/TIA 568B
Created:
2015-05-11 11:18:08
Updated:
2015-05-11 11:19:18
Category:
252
ID:
588
Name:
Robbe BID Chip mit Kabel Duplicate
Description:
BID-System
Die Vielfalt der verschiedenen Akkutypen wird immer größer, wobei jeder Akkutyp sein"eigenes"Ladeverfahren benötigt.
Die Lösung dazu kennen wir, entweder eine Vielzahl von individuellen Ladegeräten oder, wie im Modellbau weit verbreitet, Universalladegeräte.
Diese Universalladegeräte müssen natürlich auf jeden Akkutyp entsprechend eingestellt werden, zudem sind noch Zellenzahl, Ladestrom, Entladestrom etc. zu definieren. Schnell verliert man denüberblick, hat vergessen wie die Einstellung erfolgt, oder im schlimmsten Fall eine falsche Einstellung vorgenommen.
Wem ist es noch nicht passiert, eben mal schnell was Nachladen (mit der falschen Einstellung) und schon hat der wertvolle Akku Schaden genommen oder ist ganz defekt.
Das revolutionäre BID-System von robbe bietet jetzt eine geniale Lösung für dieses Problem.BID-System steht fürBatterie-IDentifikations-System.
Jedem Akku wird ein kleiner, leichter BID-Chip zugeordnet, welcher alle relevanten Daten zum optimalen Laden/Entladen des Akkus speichert.
Zum Laden bzw. Entladen wird der BID-Chip und der Akku mit einem BID-Ladegerät verbunden. Das BID-System gibt dem Lader die Parameter vor. Starttaste drücken und der Lade-Entladevorgang beginnt.
Kein lästiges Suchen der Einstell-Parameter im Menü, maximaler Schutz vor Fehlbedienung und Speicherung der relevanten Akkudaten im BID-Chip sind die besonderen Vorteile des BID-Systems.
Der BID-Chip ist so klein und leicht (0,5g), dass er am Akku angebracht oder mit eingeschrumpft werden kann. Beidseitige Steckverbindungen sorgen für ein einfaches Handling und sparen das Kabelgewicht ein.
Abmessungen: 11.7x14.2x3 mm
Created:
2015-05-21 12:03:58
Updated:
0000-00-00 00:00:00
Category:
99
ID:
589
Name:
Kugellager 625ZZ
Description:
5x16x5 mm
Created:
2015-05-23 13:47:02
Updated:
2016-04-18 18:38:08
Category:
22
ID:
590
Name:
MKll TA2024 Leistungsverstärker-Platte 2 x 15 W
Description:
Feature:
This is a small digital amplifier board, its expertise is digital signal processing technology and design mixed signal processing and power integrated circuit.
It is good, the efficiency high fidelity. Easy to carry, no small body heat.
Widely used in multimedia computer, portable audio, home theater, car audio, etc.
No heat sink; Suitable for any 4-8 ohms speakers;
Compared with the traditional AB kind of power amplifier sound extremely high;
Sound quite or more than class power amplifier;
Single power design.
Signal Output function :
Brand new and high quality.
Single 12 volts power supply.
Class-T architecture.
0.04% THD+N @ 9W, 4Ω.
0.18% IHF-IM @ 1W, 4Ω.
6W @ 8Ω, 0.1% THD+N.
11W @ 4Ω, 0.1% THD+N.
High Power :
10W @ 8Ω, 10% THD+N.
15W @ 4Ω, 10% THD+N.
High Efficiency :
88% @ 10W, 8Ω.
81% @ 15W, 4Ω.
Dynamic Range:102 dB.
Mute and Sleep inputs.
Turn-on & turn-off pop suppression.
Over-current protection.
Over-temperature protection.
Dimension : 9.2 x 5.3 x 1.5cm.
Weight: 47g
Package included:
1 x TA2024 Amplifier Board
Created:
2015-07-12 14:19:14
Updated:
2015-07-12 14:20:50
Category:
4