Parts

ID: 121
Name: Heizpatrone 12V 40W
Description: High temperature resistance cartridge tube, 2 wires, stainless steel tubular surface. Perfect for you 3D Printer HotEnd design. Good for +300 degree Celsius Need temperature regulation to prevent overheating.
Created: 2013-04-01 22:58:27
Updated: 2013-10-20 06:40:54
Category: 96

ID: 122
Name: Heizwiederstand 6,8Ohm 3W
Description: This resistor is capable to withstand high temperatures, making it perfect for your extruder.
Created: 2013-04-01 23:03:03
Updated: 2013-10-20 13:30:48
Category: 96

ID: 123
Name: Heizpatrone 12V 20W
Description: Diese Heizpatrone ist der perfekte Ersatz für den Heizwiderstand. Die Patrone ist sehr wiederstandfähig und kann extrem heiß werden. Sie ist die ideale Ergänzung für jeden Extruder.
Created: 2013-04-01 23:08:32
Updated: 2023-01-18 22:12:18
Category: 96

ID: 124
Name: Pneufit Adapter 1/8inx6mm
Description: Build your bowden extruder with these adaptors. You can use them along with http://www.thingiverse.com/thing:17234.
Created: 2013-04-01 23:14:47
Updated: 2013-10-20 10:59:32
Category: 77

ID: 125
Name: PTFE Schlauch 3,18mm ID / 6mm OD
Description: PTFE Schlauch 10cm
Created: 2013-04-01 23:19:17
Updated: 2013-10-20 14:26:24
Category: 77

ID: 126
Name: Arduino Uno R2
Description: The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
Created: 2013-04-01 23:25:06
Updated: 2013-10-20 11:05:48
Category: 79

ID: 127
Name: Electric Imp
Description: WLAN Entwicklungsplattform mit einem ARM Cortex-M3 Controller. Das interessanteste an dem Kit ist die Bauform, sie entspricht einer Standard SD Karte. We know what you're thinking, "What's the big deal? Looks like an SD card..." Well this is no SD card! The Electric Imp is a WiFi enabled development platform powered by a Cortex-M3 processor core. "Really?" Yup. In essence, the Imp provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. It's more than just a WiFi card, or even a WiFi module with processing built in - it's an integrated platform that deals with the drudgery of connectivity, allowing you to concentrate on the application instead of the mechanics. It does this by integrating an 802.11b/g/n WiFi transceiver, a great antenna, a Cortex-M3 core and lots of flexible I/O in a tiny package. But the hardware is only part of what makes the Electric Imp an innovative platform. The development environment and workflow is totally cloud-based and in-browser! Simply program the Imp with your WiFi Network information using your iOS or Android smartphone (Optically! No special hardware required!) then log on to the Electric Imp developer website and program your module over-the-air! Development is done in-browser and in a language called "Squirrel," which is a C-like language with extensions to communicate with the hardware interfaces and the service. Thanks to cloud-power, you get many big system benefits like buffered I/O and crash recovery - plus you can push updates to devices in the field with a few clicks. There's even a Planner tool that makes it easy to design interactivity between your Imps. Note: Although, the Electric Imp comes in an SD form factor, it isn't compatible with standard SD devices. Development boards are available, though, in the related items below! Dimensions: 32 x 24 x 2.1mm Features: Super Small Form Factor WEP, WPA and WPA2 encryption Cortex-M3 core gives great performance combined with low power consumption 6 I/O - UARTs, I2C, SPI, analog in and out, PWMs, GPIOs... all selectable under software control No SDK to install, no JTAG pods, no long download times... you develop your code in a browser-based IDE Software that runs on the Imp is written in Squirrel, a C-like language Data passes to and from the service over a TLS encrypted interface
Created: 2013-04-01 23:36:41
Updated: 2013-10-20 13:26:09
Category: 79

ID: 128
Name: Electric Imp Breakout (April Board)
Description: If you aren't familiar with the Electric Imp, it essentially provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. It's more than just a WiFi card, or even a WiFi module with processing built in - it's an integrated platform that deals with the drudgery of connectivity, allowing you to concentrate on the application instead of the mechanics. It does this by integrating an 802.11b/g/n WiFi transceiver, a great antenna, a Cortex-M3 core and lots of flexible I/O in a tiny package. Of course, if you're developing for it you'll need a way to get in there and poke around. The Electric Imp Breakout Board allows you to explore the capabilities of the Imp by providing standard 0.1" headers to solder to as well as the necessary CryptAuthEE IC to identify your prototype to the Imp Cloud service! Note: If you want to use the USB or battery inputs for power, you will need to populate the 3-pin jumper and set it to either 'BAT' or 'USB'. Otherwise, you can just simply power the board using VIN and GND without the use of a jumper.
Created: 2013-04-01 23:41:50
Updated: 2013-10-20 13:12:14
Category: 79

ID: 129
Name: Balancerbuchsenkabel JST-EH 4S
Description: Balancerbuchsenkabel einfach Balanceranschluss Graupner/RobbeKabel mit ca. 25cm Länge EHR Stecker. Elastisches Silikonkabel
Created: 2013-04-02 07:57:56
Updated: 2013-10-20 00:19:48
Category: 100

ID: 130
Name: Verlängerungskabel JST-EH 4S
Description: Adapterkabel zu Balanceranschluss Graupner/RobbeKabel mit ca. 20cm Länge/Buchse und Stecker. Das Kabel ist universell einsetzbar. Entweder zum Adaptieren anderer Systeme, oder einfach zum Verlängern des Balanceranschlusses.
Created: 2013-04-02 08:04:54
Updated: 2013-10-20 10:01:58
Category: 100